Temperature Controller Switch Aquarium Machine Electronic Digital Display MicrocomputerDC12V
Condition: 100% brand new_x000D_ Item type: Temperature Controller_x000D_ Material: ABS flame retardant plastic case_x000D_ Color: As picture shown_x000D_ Weight: Approx. 130g _x000D_ Power supply voltage: 110-220VAC 10%, 50/60Hz (or DC12V / DC24V)_x000D_ Measuring and controlling temperature range: -50+110_x000D_ Resolution: 0.1C_x000D_ Accuracy: 1_x000D_ Accuracy: 1_x000D_ Relay output contact capacity:_x000D_ Heating: 10A/240VAC,_x000D_ Cooling: 10A/240VCA_x000D_ Sensor h type: imported NTC sensor, cable length 1m/3.3ft_x000D_ _x000D_ Description:_x000D_ P0. Cooling and heating mode_x000D_ Please set to C for high temperature start as cooling mode_x000D_ Low temperature start is heating mode, please set to H_x000D_ P1. Hysteresis setting_x000D_ In heating mode (H): the measured value the set value-when the hysteresis starts to output the heating to the set value and stops._x000D_ In the cooling mode (C): when the measured value the set value + hysteresis, the output cooling is started and the set value stops._x000D_ P2. The highest setting range: the highest value does not exceed this value when setting the temperature_x000D_ P3. The lowest setting range: the lowest value when setting the temperature is not lower than this value_x000D_ P4. Temperature correction_x000D_ When there is a deviation between the measured temperature and the standard temperature, you can use this function to correct. The corrected temperature = the temperature before correction + the corrected value._x000D_ P5. Delay start time unit: minute_x000D_ When controlling the refrigeration of the compression engine equipment, the delay time can be set according to the needs. The equipment will not start immediately when the controller is output, and it needs to start after the set delay time is run._x000D_ P6. High temperature alarm_x000D_ When the measured value is greater than this value, the screen displays --- and an alarm will sound, and the output will be forcibly disconnected._x000D_ P7. Data lock function_x000D_ Turn on the data lock to keep the current setting unchanged. At this time, the set temperature and function are invalid. If you need to modify it, you need to turn off the data lock function._x000D_ P8. Restore factory settings_x000D_ Long press SET to switch to P8, press SET once to set to on, press for Rst to restore factory settings_x000D_ You can also press and hold the +-key and hold the power-on self-test and restore factory settings._x000D_ Instructions for use_x000D_ Please connect the power supply according to the parameters and wiring diagram, and connect the cooling or heating equipment to the output terminal._x000D_ Enter the internal settings to select heating (enter P0 to select H) or cooling (enter P0 to select C) mode as needed._x000D_ Setting temperature method: press Set once and the screen flashes, press up and down to set the desired temperature, press for Rst to confirm and return to the OUT indicator of the panel: flashing indicates the delay of cooling or heating start, and constant light indicates output_x000D_ Nixie tube: display LLL for open circuit of the sensor; display for HHH for exceeding the measuring range and the thermostat will be forced to power off; display --- for high temperature alarm.
| Brand | Unbranded |
|---|---|
| Product ID | 310303735-694045231 |
| EAN | 3599807116955 |
| $18.99 | STANDARD: | Estimated delivery date Wed 22 April 2026 ─ Wed 29 April 2026 |
Product is shipped from China.
Alternative shipping methods can be selected at checkout.
Products are shipped by the individual Fruugo retailers, who are located across Europe and the rest of the world. The delivery times and shipping prices vary depending on the retailer's location, the destination country and the selected delivery method.
Fruugo offers two delivery options: Standard Delivery or Express Delivery. All retailers offer a standard delivery service, and some retailers also offer an express delivery service.
- Standard Delivery – Domestic Standard delivery takes approximately 2-5 business days from dispatch, while an International Standard delivery takes 5-14 business days from dispatch. Normally track and trace and proof of delivery are not available on a standard service.
- Express Delivery – Domestic Express delivery takes approximately 1-2 business days from dispatch, while an International Express delivery takes 3-7 business days from dispatch. Usually track and trace and/or proof of delivery are available on an express service.
Although Fruugo retailers endeavour to deliver within these timescales, please note that the above timescales are estimated and not guaranteed.
The delivery timescales do not include any customs clearing times beyond Fruugo's control.
Please allow additional shipping time for deliveries to exceptional locations that are hard to reach, and also during busy periods such as Christmas.
All carriers deliver during normal business working hours and may require a signature on receipt, so please ensure your order is delivered to an address where someone will be available to accept it.
We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.
Certain products purchased at Fruugo cannot be returned. They fall in the following categories:
- goods which are clearly personalised or made to your specifications
- goods which are liable to deteriorate rapidly, eg fresh fruit, fresh flowers
- sealed goods which are not suitable for return due to health protection or hygiene reasons, if opened, eg make up, underwear, pierced jewellery
- sealed audio or video recordings or computer software, if opened
- newspapers, periodicals and magazines
Please take reasonable care of the goods whilst in your care. Any goods returned must be in a resaleable condition. They must be unworn/unused with original tags attached and in original packaging. It is your responsibility to ensure that the goods are appropriately packaged to ensure they are not damaged in return transit.
Notifying us of a return
If you wish to return an order, or some of the products included in an order, please notify Fruugo customer care within 14 days of receiving the goods, including the following information:
- your name,
- order number,
- the item(s) you wish to return, and
- optionally a reason for your return: unsatisfied with item, item didn't match description, damaged item, wrong item, or some other reason.
Our customer care will send you specific instructions on how to ship the return package(s) to the retailer(s). Please do not ship the return package before you receive the instructions.
Shipping products back to retailers
Goods must be returned without undue delay and in any event not later than 14 days after notifying us of your cancellation.
If you are returning products to several retailers, you should distribute the products accordingly and send the products to those retailers who shipped them to you initially.
We strongly recommend that you use registered mail (and insure any high-value packages), since neither Fruugo nor the retailer take responsibility for shipments that are lost or damaged during return transportation.
Please ensure you retain a proof of postage receipt so in the unlikely event your parcel goes missing, you will have proof you sent it.
Refunds
You will be refunded within 14 days of the retailer receiving back the goods. We will notify you by e-mail once the products reach the retailer and are accepted for return. Where a retailer has offered to collect the goods, you will be refunded within 14 days of cancelling your contract.
Unless a product or products you wish to return arrived to you damaged or faulty, you are responsible for the return transportation costs.
Providing you are returning all the products from a specific retailer, we will refund the standard shipping costs you paid for the original delivery. If you chose to pay for a non-standard delivery, we will only refund the cost of our least expensive, standard delivery.
Damaged or faulty goods
If you receive a damaged, broken, or defective product, please notify Fruugo customer care as soon as possible. Include at least the following information:
- your name,
- order number,
- name of the damaged product(s), and
- state the nature of the damage with attached photograph
We will generally instruct you to ship the damaged product back to the retailer. As soon as it reaches the retailer, they will send you a replacement product. If the replacement can't be made, or if you wish to cancel the order, you will be refunded in full. You will also be reimbursed for reasonable returns postage costs for damaged or faulty goods once we have received your postage receipt.
If the outer packaging of your order is clearly damaged on arrival, and you are suspecting that the products are damaged as well, you can either reject the delivery or accept the goods and sign for them as damaged. In both instances, please notify Fruugo customer care as soon as possible.
Refusing delivery
If you refuse to accept delivery of all or part of your order (where the products or packaging do not appear to be damaged or defective) you will be responsible for the postage charges. Any fees and charges incurred by the retailer due to a package being refused will be deducted from your merchandise refund.
Please see the compliance information specific to this product outlined below.
The following information is provided by the independent third-party retailer selling this product.
Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.
- 91440300MA5HDL2A4K
- SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
- Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
- Shenzhen
- CN
- 518102
- [email protected]
- 15625700418
Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.
- 950891051
- MJCM SARL
- 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
- Paris
- FR
- 75008
- [email protected]
- 0033 767213611